Skip to content
Back To Our Shop

YodalarmEx YO4IS – IS Sounder 100dB

Functionnality: 32 Tones

Type of fixing: Surface, Wall and Bulkhead Mounting

Ingress protection: IP65

Voltage: 24vDC

Temperature zone

YodalightEx YO4IS — Intrinsically Safe Sounder

The Yodal EX YO4IS is an intrinsically safe audible signal designed for hazardous environments, delivering up to 100dB at 1 metre with 32 selectable tones and a two-stage alarm for reliable room or zone coverage. Built in flame-retardant ABS with stainless-steel fixings and a monitoring facility, it is rated for explosive atmospheres.

Like all YodalightEx IS products it must be powered via an approved Zener Barrier or Galvanic Isolator; powering it directly will damage the unit and void protection.

Reliable, certified sounder output for explosive-atmosphere process control.

IMPORTANT! This product must be used with an approved Zener Barrier or Galvanic Isolator. All connections into the product must be made via a suitably rated barrier or isolator — never connect it directly to the voltage supply without a barrier in place, as this will cause permanent damage to the PCB and void the warranty. Installation and connection should only be carried out by appropriately competent and qualified personnel.

KEY FEATURES
  Up to 100dB at 1 metre
  32 selectable tones
  Tones meeting international regulations
  Monitoring facility
  Requires Zener barrier/isolator
  IP65 rated
  Surface, wall or bulkhead mounting
  ATEX & IECEx certified
  24vDC
MATERIALS
  Flame-retardant ABS body
  Stainless-steel fixings

Typical applications: oil and gas, petrochemical, chemical plants, offshore, hazardous-area process control.

Technical Information

Weight: N/A
Dimensions: N/A
Functionnality:

32 Tones

Type of fixing:

Surface, Wall and Bulkhead Mounting

Ingress Protection:

IP65

Voltage:

24vDC

Temperature Zone:

T4, T6

SKU: YO4IS Category: Brand:Clifford & Snell

Approvals & Conformities

  • ATEX
  • C-Tick
  • CE Marking
  • IECEX Certified
  • RoHS Directive
  • UKCA Importer

Tones

Description
Tone Number
Frequency
Applications
Alternating
1
800-1000 Hz
Fire Alarms · EN54-3
Alternating
2
2500-3100 Hz
Security Alarms
Alternating (fast)
3
800-1000 Hz
Increased urgency
Alternating (fast)
4
2500-3100 Hz
Security deterrent
Alternating
5
440-554 Hz
AFNOR, France (NFS 32001) · EN54-3
Alternating
6
430-470 Hz
Alternating (very fast)
7
800-1000 Hz
Alternating (very fast)
8
2500-3200 Hz
Alternating
9
440-554 Hz
Turn-out, Sweden
Continuous note
10
700 Hz
All-clear, Sweden
Continuous note
11
1000 Hz
EN54-3
Continuous note
12
1000 Hz
Continuous note
13
2300 Hz
Continuous note
14
440 Hz
Interrupted tone
15
1000 Hz
EN54-3
Interrupted tone
16
420 Hz
AS2220, Australia · EN54-3
Interrupted tone
17
1000 Hz
Interrupted tone
18
2500 Hz
Interrupted tone
19
2500 Hz
Interrupted tone
20
700 Hz
Pre-vital message, Sweden
Interrupted tone
21
1000 Hz
Interrupted tone
22
700 Hz
Air-raid, Sweden
Interrupted tone
23
700 Hz
Local warning, Sweden
Interrupted tone
24
720 Hz
Industrial alarm, Germany
Interrupted, fast, rising volume
25
1400 Hz
Fast siren
26
250-1200 Hz
Rising constant, falling
27
1000 Hz
Industrial alarm, Germany
ISO 8201 Evacuation
28
800-1000 Hz
Int'l evacuation alarm · EN54-3
Fast whoop
29
500-1000 Hz
Slow whoop
30
500-1200 Hz
Evacuation, The Netherlands · EN54-3
Reverse sweep
31
1200-500 Hz
Evacuation, Germany · EN54-3
Siren
32
500-1200 Hz

Accessories

Intrinsically Safe – Zener Barrier Z728

Intrinsically Safe – Zener Barrier Z928

Intrinsically Safe – Galvanic Solenoid Driver KCD0

Intrinsically Safe – Galvanic Solenoid Driver KFD0

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.