Skip to content
Back To Our Shop

TDE EX Air Horn – Sounder 132-138dB

Functionnality: Foghorn Tone

Type of fixing: Surface, Wall and Bracket Mounting

Ingress protection: IP66

Model

TDE EX — ATEX Pneumatic Air Horns

The TDE EX air horns are pneumatic, non-electrical devices powered by a compressed-air supply, ATEX and IECEx certified for hazardous areas. They bring the foghorn output of the TDE range into explosive atmospheres, where a very high sound level and a very low frequency tone are required and conventional electrical horns cannot be used safely.

The range offers three trumpet lengths, and the length dictates the note produced: the TDE198EX sounds at 660Hz, the TDE360EX at 377Hz and the TDE450EX at 307Hz. The lower the frequency, the further the sound carries — so the TDE450EX reaches furthest, while the shorter TDE198EX delivers the highest peak output at 138dB. All three are continuously rated and operate from −30°C to +90°C.

Because they carry no electrical parts, the TDE EX horns need no power supply, no cabling and no electrical infrastructure inside the hazardous area — only clean compressed air.

KEY FEATURES
  Up to 138dB at 1 metre
  Foghorn tone
  Entirely non-electrical
  TDE198EX — 660Hz
  TDE360EX — 377Hz
  TDE450EX — 307Hz
  IP66 rated
  Wall or pole mounting
  1.5–10 BAR air supply
  1.5–3.5 l/s air consumption
  ATEX & IECEx certified
MATERIALS
  Brass horn, matt black finish
  316 stainless-steel membrane housing

Typical applications: oil and gas, petrochemical and chemical plants, refineries, offshore, hazardous-area marine.

Technical Information

Weight: N/A
Dimensions: N/A
Functionnality:

Foghorn Tone

Type of fixing:

Surface, Wall and Bracket Mounting

Ingress Protection:

IP66

Model:

TDE198EX, TDE360EX, TDE450EX

Downloads

Approvals & Conformities

  • ATEX
  • C-Tick
  • CE Marking
  • IECEX Certified
  • RoHS Directive
  • UKCA Importer
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.